Relay Unit Single Channel, perfect for
High
capacity
0-10v
control
switching
Robust, single-channel relay unit designed for the reliable switching of non-dimmable lighting loads.
The Mirage MRP-10-01 is a robust, single-channel relay unit designed for the reliable switching of non-dimmable lighting loads, including LED fixtures. Rated at 10A for both resistive and inductive loads, the unit is protected by a 10A Type C Miniature Circuit Breaker (MCB). Compatible with 0–6V or 0–10V inputs from Mode systems, and 1–10V sinking from Building Management Systems, the MRP-10-01 is ideal for applications where dimming is not required but dependable switching is essential.
Designed for installations where clean on/off switching is preferred over dimming, the Mirage MRP-10-01 delivers high reliability and seamless integration with both Mode Lighting systems and external BMS platforms.
Its refined appearance and robust build make it a discreet yet powerful addition to any lighting control strategy.
Key Features
- Single switching channel of 10A resistive or 9A inductive loads
- Up to 2A of compatible LED load per channel
- Leading Edge Dimming Technology
- Control input suitable for use with 0-10V and 1-10V controllers
- 10A Type C MCB Circuit Protection
- Emergency Fixed Live MCB protected output for maintained emergency supply
- LED channel monitor to indicate the operation of the output
- Supply input 230/240V. 50-60Hz. 40A maximum (100-125V option available)
- Relay override terminal for volt free channel operation
- Channel minimum switch-off point setting
- External supply low voltage DC for use with remote dimmers and ancillary equipment
- Conduit cable entries (four) 21mm diameter suitable for use with conduits and trunking
- Complies with EC EMC and Low Voltage Directives (CE)
- 2 year warranty
Technical Data
| Power | |
| Mains Supply | 230V AC +/- 10% 50/60Hz, 10A maximum |
| Control Fuse | 20mm x 5mm 500mA HRC ceramic |
| Earth | This product must be earthed |
| Connections & Cable Specifications | |
| Channel Outputs | Single channel of 10A resistive or inductive loads Up to 2A for LED loads depending on LED de-rating factor Check with LED lamp manufacturer for recommended number of lamps on a 10A MCB or RCBO |
| Load MCB | Individual Miniature Circuit Breaker (MCB) 10A Type C |
| Control Input | 0-10V or 1-10V DC analogue control (selectable) |
| Relay Override | Low voltage override using latching device |
| Mechanical | |
| Standards | EN55015, EN61547, EN61000-3-2, EN61000-3-3, EN60439-1, EN60950 |
| Conduit Entries | Four off 21mm diameter |
| Dimensions | 220mm High x 200mm Wide x 75mm Deep |
| Fixing Centres | 182mm x 178mm |
| Weight | 1.1kgs |
| Packed Size | 230mm High x 227mm Wide x 82mm Deep |
| Packed Weight | 1.25kgs |